Zanussi ZSF 4143 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler Zanussi ZSF 4143 herunter. Zanussi ZSF 4143 24 Seiten.

Setting the water softener manually (see table)

Setting the water softener

electronically (see table)

IMPORTANT!

The water softener is factory set at position 5.

1. The dishwasher must be switched off.

Switch on the dishwasher by pressing the

On/Off button.

2. Press and hold simultaneously function

buttons B and C until the lights of function

buttons A , B and C start flashing.

3. Release the buttons and then press func-

tion button A; the lights of function buttons

B and C turn off while function button A

goes on flashing. At the same time End of

programme light starts to flash.

Filling with dishwasher salt

CAUTION!

Use only special salt suitable for dishwashers.

Set switch to position 1 or

The water softener is factory set at position 2.

The number of flashes of the End of pro-

gramme light corresponds to the current

level.

4. The End of programme light might flash 5

times, for example. The flashing is repea-

ted every 5 seconds.

5. To change the level, press function button

A. Each time the button is pressed the level

increases. (Level 1 follows level 10).

6. The End of programme light indicates the

new setting. (For the selection of the new

level see the chart).

7. To memorise the operation, switch off the

dishwasher by pressing the On/Off button.