Zanussi ZSF2430 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Geschirrspüler Zanussi ZSF2430 herunter. Zanussi ZSF2430 16 Seiten.
Auch für Zanussi ZSF2430: Benutzerhandbuch (32 seiten)

Seite drucken

• The phase indicators of the set pro-

gramme start to flash.

4. Press the start button. The programme

starts.

• The start indicator comes on.

• Only the indicator of the phase in opera-

tion stays on.

Starting a programme with delay start

1. Set the programme.

2. Press the delay button to delay the start of

the programme of 3 hours. The delay indica-

tor comes on.

3. Press the start button. The countdown

starts.

• The start indicator comes on.

• The phase indicators of the set pro-

gramme go off.

• When the countdown is completed, the pro-

gramme starts.

– The indicator of the phase in operation

comes on.

Opening the door while the appliance

operates

If you open the door, the appliance stops. When

you close the door, the appliance continues

from the point of interruption.

Cancelling the delay start while the

countdown operates

1. Press and hold the start button until the start

indicator and the delay indicator go off.

Hints and tips

The water softener

Hard water contains a high quantity of minerals

that can cause damage to the appliance and

bad washing results. The water softener neutral-

ises these minerals.

The dishwasher salt keeps the water softener

clean and in good conditions. It is important to

set the right level of the water softener. This

makes sure that the water softener uses the

correct quantity of dishwasher salt and water.

• The phase indicators of the set pro-

gramme start to flash.

2. Press the start button. The programme

starts.

• The start indicator comes on.

• Only the indicator of the phase in opera-

tion stays on.

Cancelling the programme

Press and hold the start button until the start in-

dicator goes off and the phase indicators for the

programme start to flash.

Make sure that there is detergent in the de-

tergent dispenser before you start a new

programme.

At the end of the programme

When the programme is completed, the end in-

dicator comes on. If you do not deactivate the

appliance within 3 minutes, only the on/off indi-

cator stays on. This helps to decrease energy

consumption.

1. Deactivate the appliance. Turn the pro-

gramme knob until the programme marker is

aligned with the on/off indicator.

2. Close the water tap.

Important! Let the dishes become cold before

you remove them from the appliance. Hot

dishes can be easily damaged.

Loading the baskets

• Only use the appliance to wash items that are

dishwasher-safe.

• Do not put in the appliance items made of

wood, horn, aluminium, pewter and copper.

• Do not put in the appliance items that can ab-

sorb water (sponges, household cloths).

• Remove remaining food from the items.

• Make soft the remaining burned food on the

items.