Zanussi ZTI 6100 Gebrauchsanweisung - Seite 16

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Geschirrspüler Zanussi ZTI 6100 herunter. Zanussi ZTI 6100 27 Seiten.

Seite drucken

7b. Setting and starting the

programme with "delay start"

Once a programme and required options

have been selected (see point 7a.) to use

DELAY proceed as follows:

Press the DELAY push button.

The digital display will show "h 0".

If other options have been selected the

corresponding indicator lights will turn off, but

this will not modify the settings made previously.

Press the button again to select the number of

hours by which you wish to delay the

programme start (up to a maximum of 12

hours).

To set the time setting to zero press the

DELAY push button until "h 0" appears

in the digital display.

Close the door, an audible signal will confirm

the starting of the countdown.

The digital display shows the delay time, which

will decrease with steps of 1 hour.

Once the delayed time has elapsed the

programme will start automatically.

The opening of the door will not stop the

countdown.

To cancel a programme in

progress

Open the door and press the "cancel" push

button.

A audible signal informs you that the

programme under way has been cancelled, 3

horizontal lines will appear in the digital

display (for about 2 seconds), then the number

of the last selected programme will appear.

The dishwasher has now returned to setting

mode and it is now possible to select a new

washing programme.

To stop a countdown in progress, open the door

and press the "cancel" push button, in the

digital display appears the number

corresponding to the selected programme. The

countdown has been cancelled but the setting

of the programme with eventual options remains

memorised.

At the end of the washing

programme

The dishwasher will automatically stop and

an intermittent audible signal will sound

when the programme has ended (with the

delay start the audible signal is

automatically excluded).

All indicator lights turn off and 3 flashing

horizontal lines will appear in the digital

display.

Open the door and switch off the

dishwasher by pressing the On/Off push

button.

Wait a few minutes before removing the

dishes; in this way they will be cooler and

the drying will be improved.

Empty the lower basket first and then the

upper one; this will avoid water dripping

from the upper basket onto the dishes in

the lower one.

Important!

In general it is not advisable to open the

door while the machine is working; if the

door is opened however, a safety device

ensures that the machine stops.

Care must be taken if the door is opened

during the hot phase or immediately

after a programme has finished, as

steam may escape.

When the washing programme has

finished, it is recommended that the

dishwasher is unplugged and the water

tap turned off.

SEQ35en