Zanussi ZEV8646XBA Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld Zanussi ZEV8646XBA herunter. Zanussi ZEV8646XBA 44 Seiten.
Auch für Zanussi ZEV8646XBA: Benutzerhandbuch (12 seiten), Benutzerhandbuch (48 seiten)

Seite drucken

Automatic Switch Off

The function deactivates the hob

automatically if:

• all cooking zones are deactivated,

• you do not set the heat setting after you

activate the hob,

• you spill something or put something on the

control panel for more than 10 seconds (a

pan, a cloth, etc.). An acoustic signal sounds

and the hob deactivates. Remove the object

or clean the control panel.

• you do not deactivate a cooking zone or

change the heat setting. After some time

comes on and the hob deactivates.

The relation between the heat setting and

the time after which the hob deactivates:

Heat setting

, 1 - 2

3 - 4

6 - 9

The heat setting

Touch

to increase the heat setting. Touch

to decrease the heat setting. Touch

at the same time to deactivate the cooking

zone.

Activating and deactivating the outer

rings

You can adjust the surface you cook to the

dimension of the cookware.

Use sensor field:

To activate the outer ring: touch the sensor

field. The indicator comes on.

To deactivate the outer ring: touch the

sensor field until the indicator goes out.

Automatic Heat Up

If you activate this function you can get a

necessary heat setting in a shorter time. The

function sets the highest heat setting for some

www.zanussi.com

The hob deacti-

vates after

6 hours

5 hours

4 hours

1.5 hour

and

time and then decreases to the correct heat

setting.

To activate the function the cooking

zone must be cold.

To activate the function for a cooking

zone: touch

until the correct heat setting

comes on. After 3 seconds

To deactivate the function: touch

Timer

Count Down Timer

You can use this function to set how long the

cooking zone should operate for a single

cooking session.

First set the cooking zone then set the

function. You can set the heat setting before

or after you set the function.

To set the cooking zone: touch

again until the indicator of a necessary cooking

zone comes on.

To activate the function or change the

time: touch

time (00 - 99 minutes). When the indicator of

the cooking zone starts to flash slowly the time

counts down.

To see the remaining time: set the cooking

zone with

. The indicator of the cooking zone

starts to flash quickly. The display shows the

remaining time.

To deactivate the function: set the cooking

zone with

and touch

counts back to 00. The indicator of the cooking

zone goes out.

When the time comes to an end, the

sound operates and 00 flashes. The

cooking zone deactivates.

To stop the sound: touch

Minute Minder

You can use this function as a Minute Minder

when the hob is activated and the cooking

zones do not operate (the heat setting display

shows

To activate the function: touch

of the timer to set the time. When the

comes on.

again and

of the timer to set the

. The remaining time

. Touch