Zanussi ZGF783 ITXC Gebrauchsanweisung - Seite 3
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld Zanussi ZGF783 ITXC herunter. Zanussi ZGF783 ITXC 13 Seiten. Gas hob
Auch für Zanussi ZGF783 ITXC: Gebrauchsanweisung (12 seiten)
Seite druckenTHE HOB LID
In order to make the appliance match with the kitchen
design, a lid (not provided) can be fitted on the hob.
l The lid is meant to avoid dust to settle on the
hob, when it is closed, and to collect splashes of
oil or fat, when it is open. Do not use it for any
other purpose.
l Always wipe off any splash of liquid before
opening the lid.
2. Cleaning and Maintenance
•
Disconnect the appliance from the electrical
supply, before carrying out any cleaning or
manteinance work.
Wash the enamelled components with warm soapy
water. Never use abrasive cleaners
Frequently wash the "caps" and the "crowns" with hot
soapy water, carefully taking away any built-up of food.
Carefully wash the stainless steel components with
water, then wipe them dry with a soft cloth.
The pan supports are dishwasher proof.
If the marks are particularly difficult to remove, use
common non-abrasive cleaners or specific products.
Never use steel wool pads or acids.
In models provided with electric ignition, this feature is
obtained through a ceramic "candle" and a metal
electrode (Fig. 1 lett. C). Keep these components well
clean, to avoid difficult lighting, and check that the burner
crown holes (lett. B) are not obstructed.
PAN SUPPORTS
To keep the pan supports in the right position, they are
hooked to a couple of special hinges in the back of the
hob.
Thanks to these hooks, you can lift the pan supports
for easier cleaning, as shown in Fig. 2.
To take the pan supports completely off the hob,
proceed as shown in Fig. 3.
l Always clean the lid from cooking residues before
opening it or taking it off.
l WARNING! The crystal lid can splinter when
overheated. Always ensure all the burners are
off before closing it.
Fig. 2