Zanussi ZGG 742 E Gebrauchsanweisung - Seite 29

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Kochfeld Zanussi ZGG 742 E herunter. Zanussi ZGG 742 E 40 Seiten. Electronic gas hob

Electrical connections

Any electrical work required to install

this hob should be carried out by a

qualified electrician or competent

person, in accordance with the

current regulations.

THIS HOB MUST BE EARTHED.

The manufacturer declines any liability

should these safety measures not be

observed.

This hob is designed to be connected to

a 230 V 50 Hz AC electrical supply.

Before switching on, make sure the

electricity supply voltage is the same as that

indicated on the hob rating plate. The rating

plate is located on the bottom of the hob. A

copy is attached on the back cover of this

book.

The hob is supplied with a 3 core flexible

supply cable incorporating a 3amp plug fitted.

In the event of having to change the fuse, a

3amp ASTA approved (BS 1362) fuse must

be used.

Should the plug need to be replaced for any

reason, the wires in the mains lead are

coloured in accordance with the following

code:

Green and Yellow - Earth

Blue

Brown

— Connect the green and yellow (earth)

wire to the terminal in the plug which

is marked with the letter 'E' or the

earth symbol

and yellow.

- Neutral

- Live

or coloured green