Zanussi ZGG649 Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Kochfeld Zanussi ZGG649 herunter. Zanussi ZGG649 12 Seiten. Zanussi cooktop user manual
Auch für Zanussi ZGG649: Gebrauchsanweisung (12 seiten)

Seite drucken

• Make sure you position the pan supports correctly after

cleaning.

• To make burners work correctly, make sure that the

arms of the pan supports are in the centre of the burn-

er.

• Be very careful when you replace the pan supports to

prevent the hob top from damage.

After cleaning, dry the appliance with a soft cloth.

Removing the dirt:

1. – Remove immediately: melting plastic, plastic foil,

and food containing sugar.

– Stop the appliance and let it cool down before you

clean: limescale rings, water rings, fat stains, shi-

ny metallic discolorations. Use a special cleaner

applicable for surface of hob.

2. Clean the appliance with a damp cloth and some de-

tergent.

What to do if...

Problem

There is no spark when lighting the

gas

The flame is blow out immediately af-

ter ignition

The gas ring burns unevenly

3. At the end rub the appliance dry with a clean cloth.

In order to properly place the pan supports, make sure

that the arms of the pan support are positioned in corre-

spondence with the hole placed at the base of the burner.

This way, the pan support will be stable and fixed.

Cleaning of the spark plug

This feature is obtained through a ceramic ignition candle

with a metal electrode. Keep these components well clean

to prevent difficult lighting and check that the burner

crown holes are not obstructed.

Periodic maintenance

Periodically speak your local Service Force Centre to

check the conditions of the gas supply pipe and the pres-

sure adjuster, if fitted.

Possible cause

• There is no electrical supply

• Burner cap and crown are placed

uneven

• Thermocouple is not heated suffi-

cient

• Burner crown is blocked with food

residues

Remedy

• Make sure that the unit is connec-

ted and the electrical supply is

switched on.

• Control the fuse. If the fuse is re-

leased more than one time, refer

to a qualified electrician.

• Make sure that the burner cap and

crown are in correct positions.

• After lightning the flame, keep the

knob pushed for approximately 5

seconds.

• Make sure that the injector is not

blocked and the burner crown is

clear of food particles.