Zanussi ZBB24431SV Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gefrierschrank Zanussi ZBB24431SV herunter. Zanussi ZBB24431SV 17 Seiten.
Auch für Zanussi ZBB24431SV: Benutzerhandbuch (17 seiten)

Seite drucken

WARNING! This appliance must be

earthed.

The manufacturer declines any liability

should these safety measures not be

observed.

The wires in the mains lead are coloured in

accordance with the following code:

•

A - green and yellow: Earth

•

C - brown: Live

•

D - blue: Neutral

As the colours of the wires in the mains lead of this

appliance may not correspond with the coloured

markings identifying the terminals in your plug,

proceed as follows:

1. Connect the wire coloured green and yellow to

the terminal marked either with the letter "E" or

by the earth symbol

yellow.

2. Connect the wire coloured blue to the terminal

either marked with the letter "N" or coloured

black.

3. Connect the wire coloured brown to the

terminal either marked with the "L" or coloured

red.

OPERATION

SWITCHING ON

1. Insert the plug into the wall socket.

2. Turn the Temperature regulator clockwise to a

medium setting.

SWITCHING OFF

To turn off the appliance, turn the temperature

regulator to the "O" position.

or coloured green and

4. Check that no cut, or stray strands of wire is

present and the cord clamp (E) is secure over

the outer sheath.

Make sure the electricity supply voltage is the

same as that indicated on the appliance rating

plate.

5. Switch on the appliance.

The appliance is supplied with a 13 amp fuse (B).

In the event of having to change the fuse in the plug

supplied, a 13 amp ASTA approved (BS 1362)

fuse must be used.

WARNING! A cut off plug inserted

into a 13 amp socket is a serious

safety (shock) hazard. Ensure that it is

disposed of safely.

VENTILATION REQUIREMENTS

The airflow behind the appliance must be sufficient.

min.

5 cm

200 cm

CAUTION! Refer to the assembly

instructions for the installation.

TEMPERATURE REGULATION

The temperature is regulated automatically.

However, you can set a temperature inside the

appliance yourself.

Choose the setting keeping in mind that the

temperature inside the appliance depends on:

•

room temperature,

•

frequency of opening the door,

•

quantity of food stored,

min.

200 cm