Zanussi ZFT10210WA Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gefrierschrank Zanussi ZFT10210WA herunter. Zanussi ZFT10210WA 16 Seiten.
Auch für Zanussi ZFT10210WA: Benutzerhandbuch (17 seiten)

Seite drucken

be stopped by pressing the Acoustic Sig-

nal Stop and Fast Freeze Switch once.

7. When switching on the freezer for the first

time, the Red Alarm Indicator Light will

blink until the internal temperature has

reached a level required for the safe con-

servation of frozen food.

Switching off

1. To turn off the appliance, turn the Temper-

ature Regulator to the "O" position.

2. To disconnect the appliance from the pow-

er disconnect the mains plug from the wall

socket.

Temperature regulation

The temperature within the appliance is control-

led by the Temperature Regulator situated on

the control panel.

To operate the appliance, proceed as follows:

• turn the Temperature Regulator toward lower

settings to obtain the minimum coldness.

• turn the Temperature Regulator toward high-

er settings to obtain the maximum coldness.

A medium setting is generally the most

suitable.

However, the exact setting should be chosen

keeping in mind that the temperature inside the

appliance depends on:

• room temperature

• how often the door is opened

• the quantity of food stored

• the location of the appliance.

Red Alarm Indicator Light

Under normal operating conditions, the internal

temperature of the freezer will ensure the long-

term conservation of the stored food.

When such temperature rises above a certain

level (-12 °C), the appliance will trigger an

First use

Cleaning the interior

Before using the appliance for the first time,

wash the interior and all internal accessories

with lukewarm water and some neutral soap so

www.zanussi.com

acoustic and light alarm. The light alarm is a

blink red light (Red Alarm Indicator Light), while

the acoustic alarm is an intermittent sound.

You can stop the acoustic alarm by pressing

the Acoustic Signal Stop Switch once.

When switching on the freezer for the first

time, the Red Alarm Indicator Light will

blink until the internal temperature has reached

a level required for the safe conservation of fro-

zen food.

Fast Freeze function

If more than 3-4 kg of food is to be frozen:

1. Press the Fast Freeze Switch for 2-3 sec-

onds to activate the fast-freeze function

6-24 hours before placing the fresh food in

the freezer, the Yellow Fast Freeze Indica-

tor Light will illuminate. The compressor will

now run continuously, to ensure that the

fresh food is frozen as quickly as possible.

2. It is possible to deactivate the function at

any time by pressing the Fast Freeze

Switch for 2-3 seconds.

3. Place the foods in the freezing compart-

ments (indicated with graphics).

4. Once the food is completely frozen (it may

take up to 24 hours) you can manually

switch off the fast-freeze function by press-

ing the Fast Freeze Switch for 2- 3 sec-

onds and the Yellow Fast Freeze Indicator

light will also go out.

5. Move frozen food from the freezing com-

partments into the other compartments

(storing compartments) to make room for

another freezing.

If the Fast Freeze Switch is accidentally

left on, the fast-freeze function will be au-

tomatically switched off 48 hours later. The Yel-

low Fast Freeze Indicator light will also go out.

as to remove the typical smell of a brand-new

product, then dry thoroughly.

Important! Do not use detergents or abrasive

powders, as these will damage the finish.