Zanussi ZRB632FW Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gefrierschrank Zanussi ZRB632FW herunter. Zanussi ZRB632FW 12 Seiten. Fridge freezer
Auch für Zanussi ZRB632FW: Benutzerhandbuch (13 seiten), Benutzerhandbuch (16 seiten)

Seite drucken

m1 m2

m3 m4

• Open the doors. Un-

screw the middle hinge

(m2). Remove the plas-

tic spacer (m1).

• Remove the doors.

• Remove the left-hand

cover pin of the middle

hinge (m3,m4) and

move to the other side.

• Fit the pin of the middle

hinge (m5) into the left-

hand hole of the lower

door.

Do a final check to make sure that:

• All screws are tightened.

• The edges of the doors run parallel to the side edge of

the appliance.

• The magnetic seal adheres to the cabinet.

• The door opens and closes correctly.

If the ambient temperature is cold (i.e. in Winter), the

gasket may not fit perfectly to the cabinet. In that case,

Environmental concerns

The symbol

on the product or on its packaging

indicates that this product may not be treated as

household waste. Instead it should be taken to the

appropriate collection point for the recycling of electrical

and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential

• Unscrew the lower hinge

(b1)

• Remove the left-hand

cover pins (b4) and

move to the other side.

• Re-screw the lower

hinge (b1) on the oppo-

site side.

• Unscrew the lower hinge

pivot (b2) and the spacer

(b3) and place them on

the opposite side.

• Remove the plugs (1) on

the upper side of both

doors and move them to

the other side.

• Re-insert the lower door

on the lower hinge pivot

(b2).

• Insert the middle hinge

(m2) into the left drill of

the lower door.

wait for the natural fitting of the gasket or accelerate this

process by heating up the part involved with a normal hair

drier.

In case you do not want to carry out the above mentioned

operations, contact the nearest After Sales Service Force.

The After Sales Service specialist will carry out the rever-

sibility of the doors at your cost.

negative consequences for the environment and human

health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed

information about recycling of this product, please

contact your local council, your household waste disposal

service or the shop where you purchased the product.

• Unscrew the upper

hinge pivot and place it

on the opposite side.

• Fit the upper door on the

upper door pivot.

• Re-insert the upper door

on the middle hinge piv-

ot (m5) slightly tilting

both doors.

• Re-screw the middle

hinge (m2). Do not for-

get the plastic spacer

(m1).