Zanussi ZU 790 F Gebrauchsanweisung - Seite 15

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Gefrierschrank Zanussi ZU 790 F herunter. Zanussi ZU 790 F 16 Seiten.
Auch für Zanussi ZU 790 F: Gebrauchsanweisung (16 seiten)

Seite drucken

Fitting a furniture door

Important: The components needed to fit the

furniture door have been pre-fitted on the

appliance.

The brackets are secured to the panel by means

of the 7 ¯ 3.5x13 screws supplied. Before

starting to fit the panel, remove the large top

bracket by unscrewing the screws and adjusting

pins pre-fitted on the appliance door.

The small bottom bracket need not be removed.

Place the appliance in the position where it is to be

built in.

The appliance is fitted with adjustable feet; screw the

front and rear feet in or out to adjust the height of the

appliance to that of the recess. Keeping the

appliance central in the recess, slide it in until its

back touches the wall.

Wõth a tape measure (or similar instrument),

measure distance (A) between the top edge of the

door and the top edge of the furniture door, placing it

next to the recess.

Lay the panel face down. Position the top bracket on

the panel, making sure that there is an equal

distance between it and the sides and that its

distance from the top edge is equal to distance (A)

less 1 cm. Secure the bracket with the screws

supplied. Take care not to damage the front face of

the panel whilst working.

Insert the adjusting pins (B) into their locations in the

door and screw them in.

Hook the furniture door onto the top part of the door,

inserting the pins (B) (on the door) into the elongated

holes (1) (in the top bracket fitted to the panel).

Insert the securing screws (C) through elongated

holes (2) and fix the panel without tightening the

screws.

D467

D468

D532

D533

-1cm