Zanussi ZV255RM Gebrauchsanweisung - Seite 4

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Gefrierschrank Zanussi ZV255RM herunter. Zanussi ZV255RM 12 Seiten.

Seite drucken

Before use

Position and clean the cabinet as explained in the

section "Installation".

Before inserting the power plug into the

outlet and switching on the cabinet for

the first time, leave it standing upright

for about 4 hours. Otherwise the

compressor may sustain damage. This

time will allow the oil sufficient time to

return to the compressor.

Using the freezer

To start the freezer and set the

correct temperature

Turn the thermostat control to the desired position.

1 : The lowest position of the thermostat control

results in the highest temperature inside the cabinet.

6 : The highest position of the thermostat control

results in the lowest temperature inside the cabinet.

0 : Switched off.

Allow the cabinet to run for a period of 24 hours

whenever the temperature setting is changed. This

will allow the temperature to stabilise inside the

cabinet.

Temperature inside the freezer

To ensure that foodstuff will keep for a long time, be

sure that the temperature inside the freezer is -18°C

or below. Please note, however, that the energy

consumption increases as the temperature decreases.

Switching off

Set the thermostat control to the "0" position.

Unplug the power supply plug from the wall socket.

Alarms and other features

Temperature alarm

A red warning light will glow if it is warmer than

the set temperature.

Freezing

Press the fast-freezing button approx. 24 hours prior

to placing the food in the freezer.

You need not press the fast-freezing button when

freezing smaller quantities of food during any

24-hour period.

Press the fast-freezing button to switch off

fast-freezing again about 24 hours after placing the

food in the freezer.

The yellow fast-freezing lamp remains lit as long as

the fast-freezing button is engaged.

Zanussi 818 18 83-02/9