Zanussi ZHC 925 Gebrauchsanweisung - Seite 16

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Lüftungshaube Zanussi ZHC 925 herunter. Zanussi ZHC 925 21 Seiten. Cooker hood
Auch für Zanussi ZHC 925: Gebrauchsanweisung (20 seiten)

Seite drucken

Fitting the Chimney Stack

The chimney consists of two sections. The upper

chimney measures 215mm and the lower chimney

(with the holes for recirculation on either side)

measures 728.5mm.

To fit the upper section (S) first expand

the chimney slightly to allow it to be fitted

over the brackets 2, and then secure the

chimney stack to brackets using the four

self tapping screws provided as illustrated

in Fig. 12.

To fit the lower chimney section (I) expand

the chimney slightly to allow it to be fitted

over the upper chimney (S) and the

canopy (C) as illustrated in Fig. 8.

Secure the bottom of the chimney to the

canopy using the self tapping screws

provided as illustrated in Fig. 12.

After the chimney has been secured into

position, insert the two plastic

recirculation grilles in to the apertures on

each side of the chimney. The grilles are

marked with two arrows and should be

fitted with one arrow pointing upwards and

the other toward the front.

When the hood is used in the recirculation

mode ensure that the grilles are properly

secured to the recirculation spigot R as

illustrated in Fig. 13.

Fig. 12

Fig. 13