Zanussi ZCG43TC0WA Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herde Zanussi ZCG43TC0WA herunter. Zanussi ZCG43TC0WA 24 Seiten.

Seite drucken

Safety instructions

This appliance is suitable for the following

markets: GB IE

Installation

WARNING!

Only a qualified person must install

this appliance.

• Remove all the packaging.

• Do not install or use a damaged appliance.

• Follow the installation instruction supplied

with the appliance.

• Always take care when moving the appliance

as it is heavy. Always use safety gloves and

enclosed footwear.

• Do not pull the appliance by the handle.

• The kitchen cabinet and the recess must

have suitable dimensions.

• Keep the minimum distance from the other

appliances and units.

• Make sure that the appliance is installed

below and adjacent safe structures.

• Parts of the appliance carry current. Close

the appliance with furniture to prevent

touching the dangerous parts.

• The sides of the appliance must stay

adjacent to appliances or to units with the

same height.

• Do not install the appliance on a platform.

• Do not install the appliance adjacent to a

door or under a window. This prevents hot

cookware to fall from the appliance when the

door or the window is opened.

• Make sure to install a stabilizing means in

order to prevent tipping of the appliance.

Refer to Installation chapter.

Electrical Connection

WARNING!

Risk of fire and electrical shock.

• All electrical connections should be made by

a qualified electrician.

• The appliance must be earthed.

• Make sure that the electrical information on

the rating plate agrees with the power

supply. If not, contact an electrician.

• Always use a correctly installed shockproof

socket.

• Do not use multi-plug adapters and

extension cables.

• Do not let mains cables touch or come near

the appliance door, especially when the door

is hot.

• The shock protection of live and insulated

parts must be fastened in such a way that it

cannot be removed without tools.

• Connect the mains plug to the mains socket

only at the end of the installation. Make sure

that there is access to the mains plug after

the installation.

• If the mains socket is loose, do not connect

the mains plug.

• Do not pull the mains cable to disconnect

the appliance. Always pull the mains plug.

• Use only correct isolation devices: line

protecting cut-outs, fuses (screw type fuses

removed from the holder), earth leakage trips

and contactors.

• The electrical installation must have an

isolation device which lets you disconnect

the appliance from the mains at all poles.

The isolation device must have a contact

opening width of minimum 3 mm.

• Fully close the appliance door, before you

connect the mains plug to the mains socket.

Gas connection

• All gas connections should be made by a

qualified person.

• Before installation, make sure that the local

distribution conditions (nature of the gas and

gas pressure) and the adjustment of the

appliance are compatible.

• Make sure that there is air circulation around

the appliance.

• The information about the gas supply is on

the rating plate.

• This appliance is not connected to a device,

which evacuates the products of

combustion. Make sure to connect the

appliance according to current installation

regulations. Pay attention to requirements

regarding adequate ventilation.

Use

WARNING!

Risk of injury and burns.

Risk of electrical shock.

• This appliance is for household use only.

• Do not change the specification of this

appliance.