Zanussi ZCG62256 Benutzerhandbuch - Seite 24

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herde Zanussi ZCG62256 herunter. Zanussi ZCG62256 28 Seiten.

Adjusting the minimum gas level on the

hob burner

1. Disconnect the appliance from the

electricity.

2. Remove the knob for the hob. If there is no

access to the bypass screw dismount the

control panel before adjustment start.

3. With a thin and flat screwdriver adjust the

bypass screw A.

The model determines the position of the

bypass screw A.

Changing from natural gas to liquid gas

1. Fully tighten the bypass screw.

2. Put the knob back.

Changing from liquid gas to natural gas

1. Unscrew approximately one turn the bypass

screw position A.

2. Put the knob for the hob back.

3. Connect the appliance to the electricity.

WARNING!

Put the mains plug into the

mains socket only if all parts are

back into their initial position.

There is a risk of injury.

4. Light the burner.

Refer to "Hob - Daily use" chapter.

5. Turn the knob for the hob to the minimum

position.

6. Remove the knob for the hob again.

7. Screw on slowly the bypass screw till the

flame becomes minimum and stable.

8. Put the knob for the hob back on.

Oven injector replacement

1. Remove the bottom plate of the oven cavity

to get access to the oven burner .

2. Carefully remove from the burner the

thermocouple A. Next remove the spark

plug B.

3. Unscrew the screw and slowly pull out the

burner.