Zanussi ZCG62386 Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herde Zanussi ZCG62386 herunter. Zanussi ZCG62386 28 Seiten.

Seite drucken

Oven Functions

Oven function

Off position

1 - 8

Heat settings

Grilling

Oven fan

Oven lamp

Turnspit

1 - 8

Gas Multifunction

1) 1 - 140°C, 2 - 155°C, 3 - 170°C, 4 - 180°C, 5 - 195°C, 6 - 215°C, 7 - 225°C, 8 - 240°C

Ignition of the oven gas burner

CAUTION!

When turning on the oven burner

the oven door must be opened.

CAUTION!

Make sure that the lid is opened.

When using the oven the lid has to

be opened to avoid over-heating.

Oven safety device:

The gas oven has a thermocouple. It

stops the gas flow if the flame goes

out.

1. Open the oven door.

2. Ignite the oven gas burner.

• For integrated ignition on the control

knob turn the knob for the oven

functions counterclockwise to the

maximum heat settings and push it to

light the burner.

Keep the knob for the oven functions

pushed for 15 seconds or less to let the

thermocouple warm up. If not, the gas flow

is interrupted.

www.zanussi.com

The appliance is off.

Range of temperature levels adjustment for the oven.

To grill flat food in the middle of the grill. To make toast.

To thaw frozen food.

To use the fan in combination with the gas oven burner

ignite the gas oven and turn the knob for the grill clock-

wise to activate the fan.

To illuminate the oven interior.

To use this function, press the button for the lamp.

To spit roasting meat.

To cook several different dishes at the same time. To

cook home-made syrup, dry mushrooms or fruit.

Manual ignition of oven gas burner

In case of absence of the electricity you can

ignite the oven burner without an electrical

device.

1. Open the oven door.

2. Hold the flame near the hole in the bottom

of the oven cavity.

3. At the same time push the knob for the

oven functions and turn it counterclockwise

to the maximum gas flow position.

4. When the flame comes on, keep the knob

for the oven functions pushed on the

maximum gas flow position for 15 seconds

or less to let the thermocouple warm up.

Application