Zanussi ZKC6020 Benutzerhandbuch - Seite 34

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herde Zanussi ZKC6020 herunter. Zanussi ZKC6020 40 Seiten. Zanussi cooker user manual
Auch für Zanussi ZKC6020: Merkmale und Funktionen (9 seiten), Benutzerhandbuch (40 seiten)

Seite drucken

• We recommend you use a new length of

6mm

twin core earthed cable to ensure your

safety.

• Make connection by proceeding as follows: -

Note: Blanking plates not to be removed.

Ensure that the links are fitted as shown

• Pre-form wires to the appropriate shape to

suit fitting into the mains terminal block.

• Strip inner insulation on wires using wire

strippers.

• Twist the bared wires using pliers.

• Cut bared wires 10mm away from the end of

the inner insulation.

• Where uninsulated Earth wires are used

ensure they are suitably sheathed to leave

10mm bare wire to fit into the terminal.

• Clamp bare wires into the relevant terminal

and check they are held by tugging each one

in turn.

• Ensure all screws are securely tightened.

• Clamp the mains cable securely ensuring

5mm of the outer insuation is inside the

terminal block and that the wires are not taut

but not so slack as to cause any fouling.

• Connect the remaining end of the mains

cable to the appliance to the appliance point

/ junction box.

• Place fuse / miniature circuit breaker in

circuit and switch on at mains.

• When refitting the mains terminal cover,

ensure that the lower tabs are located inside

the bottom edge of the aperture, before

fixing the two screws into the top edge of the

mains terminal cover.

• Ensure that the cover is securely fastened.

Note: House circuit

Earth leakage / continuity tests must be carried

out before the appliance is connected to the

mains supply and re-checked after fitting.