Zanussi ZKG5530 Benutzerhandbuch - Seite 31

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Herde Zanussi ZKG5530 herunter. Zanussi ZKG5530 36 Seiten. Range cookers
Auch für Zanussi ZKG5530: Merkmale und Funktionen (9 seiten)

Seite drucken

The stability chain anchor point on the

appliance is shown below.

Pressure testing

The Rapid injector is used as a pressure

test point.

Connect the pressure gauge to the Rapid

injector.

Check the supply pressure by turning the

Rapid burner on and one other hotplate

burner full on and light the appropriate

burner. The pressure should be 20mbar.

Turn off the taps, disconnect the pressure

gauge.

Check operation of each hotplate burner.

Checking the grill

• Place the grill pan containing the grid, with

the handle attached, into the grill

compartment. Light the grill burner by turning

the grill tap full on and pressing the ignition

button on the fascia panel. As soon as the

burner is lit the button can be released.

Checking the hob

• Fit the burner crowns and caps ensuring that

they are correctly seated. Fit the pan

supports.

• Check each of the hob burners in turn by

turning the hob tap to its full on position and

pressing the ignition button. As soon as the

burners are lit the button can be released.

Checking the main oven

1. Turn on the oven thermostat control knob to

mark 9. As soon as the burner is alight the

control can be released.

2. There should now be a low gas rate to the

burner, which is the F.S.D bypass rate.

3. When the F.S.D. phial has heated up it

opens the F.S.D valve, which allows the

main gas supply to the oven burner.

4. After 1 minute check that the flame covers

the full width of the burner and is stable.

5. Set the oven control to Mk 2, close the oven

door and check that after about 10 minutes

the flame size has reduced.

6. Turn off the control and check that the oven

flames go out.

Checking the main oven light

• Turn the main oven thermostat knob full on

and check that the main oven light is

operative. Turn off the thermostat.

General note

• Instruct the user on how to use the appliance

and its ignition system. Refer the user to the

wording inside this manual which gives

advice on the safe operation of the

appliance.