Directed Directechs DB3 Installationshandbuch - Seite 19

Seite drucken

Directed Directechs DB3 Installationshandbuch

Quick Reference Guide (customer copy)

Sending commands to your vehicle

Whether you want to remote start the engine, lock/unlock the doors or pop the trunk, there

are 3 possible ways you can send commands to your vehicle, using the:

• Factory remote.

• Aftermarket remote.

• Directed SmartStart application via your smartphone.

If applicable, you can also start the engine remotely by pressing the Lock button 3 times

quickly on your factory remote.

Vehicle takeover with Get In and Go

Close the vehicle doors, hood and trunk, then press the

Remote Start button on the transmitter to start the vehicle.*

Press the Unlock button on the factory or aftermarket

remote.*

Complete the following steps within 45 seconds or the vehicle will shut down.

Enter the vehicle, while making sure the factory remote is

inside with you.

Depress the brake pedal, put the car in gear and drive off.

* Icon and remote appearance may differ depending on the model purchased.

Get In and Go

Get In and Go is designed to provide users with easy takeover when entering their Push-to-Start

(PTS) equipped vehicle, once it has been remote started.

Typically, users would have to remote start their vehicle, then get inside and press the PTS button

to perform a takeover. There is therefore a physical action required to drive away. With Get In

and Go, you simply remote start the vehicle, unlock the doors, get in and go... All that's left to do

is put the gear in drive and drive off.

403.NISS4HT 2.36 2023 Nissan Armada (Smart Key)

Pit stop/idle mode

Stop the vehicle in a safe parking spot and put the gear

in Park (P).

Press the Remote Start button on the transmitter.*

The parking lights will flash once to indicate the vehicle is

now in Pit Stop Mode.

It is safe to leave the engine running and exit the vehicle

with the factory remote in hand.

Note: We recommend that you always lock the doors of

Press Remote

your vehicle when leaving it unattended.

Start button*

* Icon and remote appearance may differ depending on the model purchased.

Press Unlock on

either remote*

List of available commands

Note that the information below is for many Viper, Clifford, Python, Avital, Automate,

Autostart and AstroStart models. Icons and commands may differ depending on the model

and options purchased. Refer to your authorized installation center for more specific

Enter

vehicle

14:36

information.

with

remote

Ready

Button(s)

to drive

off

* Icon and remote appearance may differ depending on the model purchased.

14:36

Actions

Press & hold for 1 second to lock.

Press & hold for 1 second to unlock.

Press & hold for 1 second to remote start.

* Press & hold for 5 seconds to activate the trunk release (optional).

Put

gear in Park

Parking lights

Press

flash x1

Remote

Start

button*

14:36

Exit

vehicle

with

remote