Clarke VE Ranges Betriebs- und Wartungsanleitung - Seite 5

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Luftkompressor Clarke VE Ranges herunter. Clarke VE Ranges 17 Seiten.

ELECTRICAL CONNECTIONS

IMPORTANT - SINGLE PHASE MACHINES ONLY

The wires in the mains lead of this machine are coloured in accordance with the

following code:

Green and Yellow

As the colours of the wires in the lead of this appliance may not correspond with

the coloured markings identifying the terminals in your plug, proceed as follows.

•

The wire which is coloured green and yellow must be connected to the

terminal which is marked with the letter E or by the earth Symbol ( ) or coloured

green or green and yellow.

•

The wire which is coloured blue must be connected to the terminal which is

marked with the letter N or coloured black.

•

The wire which is coloured brown must be connected to the terminal which is

marked with the letter L or coloured red.

WARNING: This machine must be earthed.

Pump: Use Clarke compressor oil, as indicated on machine plate.

Engine: (Petrol or diesel) refer to maker's handbook.

BEFORE STARTING COMPRESSOR, CHECK:-

Compressor Pump Oil Level by -

Engine oil and fuel levels (where applicable) see

manufacturers handbook for details.

(a) Automatic Control:- Pressure switch ON/OFF switch is in

the OFF position

(b) Genie Control:- Ensure bleed valve is open. (See Fig.5, item 2).

1.Before starting compressor, open all outlet valves.

2.The following start and stop instructions must be followed in the correct

sequence to avoid serious damage to the compressor/motor.

–

Earth

Blue

–

Neutral

Brown

–

Live

(a) Dipstick (to level marked)

or - (b) Sight glass (see fig.1)

WARNING

Fig.1