Alecto FR-17 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Zwei-Wege-Radio Alecto FR-17 herunter. Alecto FR-17 6 Seiten.

Seite drucken

3.5 Roger Beep

The Roger Beep is a tone which is automatically transmitted

whenever the PTT button is released. This alerts the

receiving party that you have ended the transmission, and

you are now in receive mode.

3.6 Changing Channels

The PMR has 8 available channels. To change channels, in

normal mode;

a. Press the MENU button, the channel icon "1 " on the LCD screen

will start blinking.

b. While the Channel icon is blinking, press the

(DOWN) button to select the desired channel. The

channel changes from 1 to 8, or from 8 to 1.

c. Press the MENU button to confirm your selection and return to

the normal mode.

3.7 Setting to Power Hi/Low

a. Press the MENU button, the current Power setting is blinking

b. Press the

(UP) or

power settings.

c. Press the PTT button to confirm the setting.

3.8 Monitor

You can use the Monitor feature to check for weak signals on the

current channel.

a. To activate the Monitor function, press the MENU and the

button at the same time.

b. If you hear constant noise and hissing sound, press the MENU

button once to turn off the Monitor function.

Note:

Refer to the "Channel Table" section of this Owner's Manual

for detailed frequency listing.

3.9 Channel Scan

Channel scan performs searches for active signals in an

endless loop from channels 1 to 8. This allows you to find other

radios without having to change channel. To activate this

feature;

a. Press and hold down the

seconds. The channel number on the LCD Screen changes

rapidly until an active signal is detected.

b. When an active signal (one of the 8 channels) is detected,

channel scan pauses on the active channel.

c. Press the PTT button to communicate through the active signal

channel, and the channel scan will be deactivated. (OR press

the

(UP) or

(DOWN) button to continue the channel

scanning.)

d. Press the MENU button to stop the channel scanning operation.

(UP) or

(DOWN) button to select the desired

(UP)

(UP) or

(DOWN) button for 3