Clarke 6500403 Handbuch für Betrieb und Wartung - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Sander Clarke 6500403 herunter. Clarke 6500403 15 Seiten. Belt/disc sander
Seite drucken
Safety Precautions
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
1.
ALWAYS Learn the machines applications, limitations and the
specific potential hazards peculiar to it. Read and become familiar
with the entire operating manual.
2.
ALWAYS use a face or dust mask if operation is particularly dusty.
3.
ALWAYS check for damage. Before using the machine, any
damaged part, should be checked to ensure that it will operate
properly and perform its intended function. Check for alignment
of moving parts, breakage of parts, mountings and any other
condition that may affect the machines operation. Any damage should be properly
repaired or the part replaced. If in doubt, DO NOT use the machine. Consult your
local dealer.
4.
ALWAYS disconnect the machine from the power supply before servicing and when
changing accessories.
5.
ALWAYS wear safety goggles, manufactured to the latest European Safety Standards.
Everyday eyeglasses do not have impact resistant lenses, they are not safety
glasses.
6.
ALWAYS keep work area clean. Cluttered areas and
benches invite accidents.
7.
ALWAYS ensure that adequate lighting is available. A
minimum intensity of 300 lux should be provided. Ensure
that lighting is placed so that you will not be working in
your own shadow.
8.
ALWAYS keep children away. All visitors should be kept a safe distance from the
work area, especially whilst operating the machine.
9.
ALWAYS maintain machine in top condition. Keep tools/machines
clean for the best and safest performance. Follow maintenance
instructions.
10.
ALWAYS handle with extreme care do not carry the tool/machine
by its' electric cable, or yank the cable to disconnect it from the
power supply.
11.
ALWAYS ensure the switch is off before plugging in to mains. Avoid
accidental starting.
12.
ALWAYS concentrate on the job in hand, no matter how
trivial it may seem. Be aware that accidents are caused
by carelessness due to familiarity.
13.
ALWAYS keep your proper footing and balance at all
times - don't overreach. For best footing, wear rubber
soled footwear. keep floor clear of oil, scrap wood, etc.
WARNING:
4