Clarke air CAT54 Betriebs- und Wartungsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Sander Clarke air CAT54 herunter. Clarke air CAT54 17 Seiten.

8. Do not carry out any alterations or modifications to the tool.

9. Always disconnect from the air supply when:

• Performing any maintenance.

• The tool is not in use.

• The tool will be left unattended.

• Moving to another work area.

• Passing the tool to another person.

10. Never use the tool if it is defective or operating abnormally.

11. The tool should be serviced at regular intervals by qualified service

personnel.

12. Avoid damaging the tool by applying excessive force of any kind.

13. Always maintain the tool with care. Keep it clean for the best and safest

performance.

14. Quick change couplings should not be located at the tool. They add

weight and could fail due to vibration.

15. Do not force or misuse the tool. It will do a better and safer job at the rate

for which it was designed.

16. Do not remove any labels. Damaged labels should be replaced.

17. This tool vibrates with use. Vibration may be harmful to your hands or arms.

Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek

medical advice before resuming use.

USE OF THE POLISHING TOOL

1. Try to hold the tool with both hands. Ensure that the workpiece is kept at

waist height where possible. Never use the tool between the legs whilst

sitting on the floor.

2. Always allow the tool to run up to full operating speed before applying it to

the job.

3. Use clamps, or vices to hold a loose workpiece. Failure to secure the

workpiece could result in personal injury.

4. Inspect the pad/mop before use. Do not use if split or torn.

5. Always wear a face mask when using the sander as protection from

airbourne particles. Avoid disturbing existing dust and minimise the

scattering of dust in the worplace environment. Take steps to control the

dust at the point of emission.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]