Clarke CAT40B Betriebs- und Wartungsanleitung - Seite 8
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Sander Clarke CAT40B herunter. Clarke CAT40B 17 Seiten. High speed belt sander
Seite drucken
.
• The belt should be correctly tracked.
2. To adjust the handle position, slacken the hex headed screw, rotate the
handle to the required position, then secure by re-tightening the hex screw.
3. Connect to the airline and turn the air on.
• Only use sanding belts designed for use with this type of sander.
OPERATING
1. Squeeze the trigger against the body of the tool to start the sander and
control the speed. Evaluate the speed and adjust to suit.
2. Ensure your fingers are clear of the sanding belt. Allow the motor to reach
max speed before offering the belt to the workpiece.
3. To begin work, rest the belt on the workpiece and start the sander.
• Let the tool do the work. The actual weight of the machine is
normally sufficient for efficient sanding. Do not put additional
pressure on the machine, which would only slow down the speed of
the belt, reducing efficiency and placing an additional burden on
the motor.
4. Take care to keep the sander moving around at all times. Avoid dwelling in
one place for more than a moment.
5. Release the trigger to stop the tool.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
8