Clarke CONTRACTOR CON300 Handbuch für Betrieb und Wartung - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Sander Clarke CONTRACTOR CON300 herunter. Clarke CONTRACTOR CON300 17 Seiten. Electric sander
Seite drucken
SAFETY PRECAUTIONS
WARNING!
As with all machinery, there are certain hazards involved with their
operation and use. Exercising respect and caution will considerably
lessen the risk of personal injury. However, if normal safety precautions
are overlooked or ignored, personal injury to the operator or damage
to property, may result.
1. ALWAYS Learn the machines' applications, limitations and the specific
potential hazards peculiar to it. Read and become familiar with the entire
operating manual.
2. ALWAYS use a face or dust mask if sanding operation is particularly dusty.
3. ALWAYS check for damage. before using the machine, any damaged
part, should be checked to ensure that it will operate properly, and
perform its intended function. Check for alignment of moving parts,
breakage of parts, mountings, and any other condition that may affect
the machines' operation. Any damage should be properly repaired or the
part replaced. If in doubt, DO NOT use the machine. Consult your local
dealer.
4. ALWAYS disconnect the tool/machine from the power supply before
servicing and when changing accessories.
5. ALWAYS wear safety goggles, manufactured to the latest European Safety
Standards. Everyday eyeglasses do not have impact resistant lenses, they
are not safety glasses.
6. ALWAYS keep work area clean. Cluttered areas and benches invite
accidents.
7. ALWAYS ensure that adequate lighting is available. A minimum intensity of
300 lux should be provided. Ensure that lighting is positioned so that you
will not be working in your own shadow.
8. ALWAYS keep children away. All visitors should be kept a safe distance from
the work area, especially whilst operating the machine.
9. ALWAYS maintain machine in top condition. Keep tools/machines clean for
the best and safest performance, follow maintenance instructions.
10. ALWAYS handle with extreme care do not carry the tool/machine by its'
electric cable, or yank the cable to disconnect it from the power supply .
11. ALWAYS ensure the switch is off before plugging in to mains. Avoid
accidental starting.
12. ALWAYS concentrate on the job in hand, no matter how trivial it may seem.
Be aware that accidents are often caused by carelessness due to
familiarity.
13. ALWAYS keep your proper footing and balance at all times - don't
overreach. For best footing, wear rubber soled footwear. Keep floor clear
of oil, scrap wood, etc.
14. ALWAYS wear proper apparel. Loose clothing or jewellery may get caught
in moving parts. Wear protective hair covering to contain long hair.
4