Clarke CP150 Handbuch für Betrieb und Wartung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Sander Clarke CP150 herunter. Clarke CP150 17 Seiten. 150mm (6”) orbital sander/polisher
Seite drucken
4. Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
5. Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
6. Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
7. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those
intended could result in a hazardous situation.
SERVICE
1. Have your power tool serviced by a Clarke service centre using only
identical replacement parts. This will ensure that the safety of the power
tool is maintained.
SAFETY SYMBOLS
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Read instruction manual before use
Wear safety glasses
Wear protective dust mask
5