Clarke CP150 Handbuch für Betrieb und Wartung - Seite 9
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Sander Clarke CP150 herunter. Clarke CP150 17 Seiten. 150mm (6”) orbital sander/polisher
Seite drucken
OPERATION
Whether polishing or sanding, always make sure that any loose workpiece is
securely fixed ie. clamped to a workbench or secured in a vice.
• When working on car bodywork, the vibration may cause any items
left on the car body to fall down.
• Always keep the work area tidy.
STARTING THE MACHINE
1. Adjust the speed control marked
1-6 to the desired working speed.
2. Hold the machine firmly with both
hands and squeeze the trigger.
The motor will then run.
CONTINUOUS OPERATION
1. Press and hold the trigger lock
button whilst holding the trigger in
and the machine will run
continuously.
• The machine will continue to run even if the trigger is released.
2. To release the trigger lock button, squeeze the trigger, then release and the
motor will stop.
3. Slowly apply the machine to the workpiece and proceed to sand or polish.
Move the disc across the work applying a light even pressure.
WARNING: ENSURE THAT THE WORKING POSITION ADOPTED DOES NOT
CAUSE OPERATOR FATIGUE WHICH MAY LEAD TO LOSS OF CONTROL
4. If it is necessary to change the speed, always lift the disc from the work
surface, adjust the speed control to the required speed then reapply to the
work surface and continue as before.
STOPPING WORK
1. On completion, lift the machine from the work surface and release the
trigger
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9