Clarke Super 7R Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Sander Clarke Super 7R herunter. Clarke Super 7R 6 Seiten. Dc edger
Auch für Clarke Super 7R: Benutzerhandbuch (16 seiten), Benutzerhandbuch (17 seiten), Betrieb?und Sicherheit (2 seiten)

Seite drucken
Clarke Super 7R Handbuch
Symptom
Cause
Sander will not
No power at outlet
turn on
Defective cord or plug
Defective switch
Broken wire or bad connection
on brush holder assembly
Extremely worn motor brushes
Defective armature
Excessive arcing
Brushes worn
at motor brushes
Broken wire or bad connection
on brush holder assembly
Worn or defective armature
Sander bounces
Bent or damaged sanding pad
on floor when
sanding
Poor dust pick-up
Dust bag is dirty
Obstruction in dust tube
Castors adjusted improperly
56043142
Dust bag is over 1/3 full
Repair
Check and repair power supply or move to
another outlet
Check continuity and replace defective part
Replace switch
Repair or replace brush holder assembly
Replace brushes
Replace armature
Replace brushes
Repair or replace brush holder assembly
Replace armature
Dress or replace pad
Empty bag
Shake debris from bag and wash or replace bag
Clear dust tube
Adjust castors
Page 4