Directed Electronics 100 ESP Benutzerhandbuch - Seite 12

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Autoalarm Directed Electronics 100 ESP herunter. Directed Electronics 100 ESP 20 Seiten.

All manuals and user guides at all-guides.com

Silent Mode

Use the Silent Mode to temporarily turn off the arm or disarm con-

firmation honks by briefly pressing

disarming the system. The confirmation honk(s) will then be elim-

inated for that one operation only. To permanently turn off the

arm and disarm confirmation honks, contact your installation

dealer.

Valet® Mode

You can prevent your system from automatically activating the

Failsafe® Starter Kill relay and locking the doors, by using Valet®

Mode. This is very useful when washing the vehicle or having it

serviced. In Valet® Mode, the system will not activate the Starter

Kill, even with the transmitter, but all convenience functions

(door locks, trunk release, etc.) will work normally.

To enter or exit Valet

Turn ignition to "on" position,

then turn to "off" position. Press

and release the Valet switch within

10 seconds. The status LED will

light steady if you have entered

Valet Mode. To exit Valet Mode,

repeat the steps above. The LED

will turn off when exiting Valet

Mode.

before either arming or

Mode with the Valet switch

1999 Directed Electronics, Inc.

DRW-35