Clarke X-PRO CAT 160 Betriebs- und Wartungsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Sander Clarke X-PRO CAT 160 herunter. Clarke X-PRO CAT 160 17 Seiten.

STORAGE

If the tool is to be stored, or is idle for longer than 24 hours, run a few drops of

Clarke air-line oil into the air inlet and depress the trigger in order to lubricate

the internal parts.

When not in use, the sander should be disconnected from the air supply and

stored in a dry place out of the reach of children. Avoid storing in a damp

environment.

ABRASIVE DISCS

Replacement hook and eye backed abrasive discs (6"/150mm) diameter are

available from your CLARKE dealer:

Fine

Medium

Coarse

A wide range of airline accessories is available including filter/regulators,

lubricators, high-pressure hoses (5 to 50 metres) etc. Contact your Clarke

dealer or Clarke International Service Department for further information.

Clarke Air-lne Oil (Part no. 3050825) is available from your Clarke dealer.

Do not dispose of redundant or damaged airline components with general

household waste. All tools, accessories and packaging should be sorted,

taken to a re-cycling centre and disposed of appropriately.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12

months from the date of purchase. Please keep your receipt which will be

required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or

tampered with in any way, or not used for the purpose for which it was

intended.

Faulty goods should be returned to their place of purchase, no product can

be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

Part No 6463305

Part No 6463310

Part No 6463315