Directed Electronics 410 Benutzerhandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Autoalarm Directed Electronics 410 herunter. Directed Electronics 410 20 Seiten. Dei automate 410: owners guide
Auch für Directed Electronics 410: Benutzerhandbuch (20 seiten)

Seite drucken

Programming Options

Programming options control what your system does during normal
operation, and require little or no additional parts. However, some
may require additional installation labor.
The following is a list of program settings, with the factory settings
in Bold:
Passive mode or active mode. In passive mode the Failsafe
Starter Kill relay will be automatically activated 30 seconds
after the ignition key is turned off.
Both the ignition switch-controlled door lock and unlock fea-
tures can be turned on or off. If ignition door lock is on, the
vehicle's door will lock three seconds after the key is turned
on. If ignition door unlock is on, the vehicle's doors will
unlock when the key is turned off.
Passive door locking (with passive arming) or active door
locking (only when arming with the transmitter). This feature
only works if passive arming has been turned on.
The locking and unlocking horn honk confirmations can be
programmed on or off. The vehicle's horn must be connected.
Domelight supervision when the key is turned off can be pro-
grammed on or off. If programmed on, the domelight will turn
on for 30 seconds each time the ignition is turned off.
10
1999 Directed Electronics, Inc.
©