Clarke 7230604 Handbuch für Betrieb und Wartung - Seite 7
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Water Pump Clarke 7230604 herunter. Clarke 7230604 13 Seiten. 1300w submersible pump
Seite drucken
MAINTENANCE
WARNING: BEFORE CHECKING THE CONDITION OF THE PUMP, ENSURE IT
IS UNPLUGGED FROM THE MAINS SUPPLY. IF THE UNIT IS HARD WIRED,
ENSURE THE CIRCUIT BREAKER IS OPEN.
This pump should require no maintenance other than regular cleaning. If the
pump starts to show signs of wear or damage, contact your CLARKE dealer for
advice.
CLEANING
1. Check the pump installation regularly to ensure the water inlet is clear of
leaves or other debris. Take extra care to remove any debris from around
the impeller.
NOTE: Do not attempt to repair the pump yourself, as you may damage the
waterproof seal and invalidate your guarantee. Repairs must be
carried out by your CLARKE dealer, or contact the CLARKE Service
Department, on 020 8988 7400.
STORAGE
When the pump is not being used for extended periods, clean and dry it
thoroughly and store in indoors. if the pump is left in water, it must be run at
least once a week to prevent it from seizing up.
SPECIFICATIONS
Voltage
Outlet Thread Diameter
Power
Maximum Head Height
Maximum Depth
Maximum Flow
Maximum Water Temperature
Maximum Particle Size
Weight
Cable Length
Dimensions (D x W x H)
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
230V~50Hz
2" BSP
1300W
11 m
7 m
417 l/min
o
35
C
40 mm
7.8 kg
10 m
222 x 218 x 427 mm
7