Clarke CGP870 Handbuch für Betrieb und Wartung - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Water Pump Clarke CGP870 herunter. Clarke CGP870 17 Seiten. 870w grinder/slurry pump
Seite drucken
INTRODUCTION
Thank you for purchasing this CLARKE submersible pump designed for
pumping/grinding waste water containing light slurry or sewage.
The CLARKE range of submersible pumps are suitable for discharging pools,
ponds, fountains, pits and any waste water drainage. They can handle foul
water containing suspended material as listed in the specification. The pumps
are not suitable for handling inflammable, corrosive, explosive or dangerous
liquids.
The 'Pump Performance Curve' graph shown, displays the characteristics
graphically and describes the relation between the flow-rate and the head
for the pump.
The pump is provided with a thermal overload cut-out, so that in the event
that the pump becomes overheated (due to becoming blocked etc) it will
shut off automatically. When the blockage has been cleared, the thermal
cutout will cool down and re-set and the pump can be re-started.
Before attempting to use this product, it is essential that you read this manual
thoroughly and carefully follow all instructions given. In doing so you will ensure
the safety of yourself and that of others around you, and you can also look
forward to the product giving you long and satisfactory service.
SPECIFICATIONS
Voltage
Outlet Thread Diameter
Power
Ingress protection rating
Maximum Head Height
Maximum Depth
Maximum Flow
Minimum pick up water depth
Maximum Operating Temperature
Weight
Cable Length
Dimensions (D x W x H)
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
230V~50Hz
1¼"BSP
870W
IP68
10 m
8 m
140 L/min
50mm
o
40
C
15 kg
10 m
215 x 170 x 305 mm
2