Clarke CPE15A1 Handbuch für Betrieb und Wartung - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Water Pump Clarke CPE15A1 herunter. Clarke CPE15A1 17 Seiten. Water pump
Auch für Clarke CPE15A1: Handbuch für Betrieb und Wartung (16 seiten)
Seite drucken
ELECTRICAL CONNECTIONS
WARNING! READ THESE ELECTRICAL SAFETY INSTRUCTIONS
THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE
MAINS SUPPLY.
Before switching the pump on, make
sure that the voltage of your
electricity supply is the same as that
indicated on the rating plate or on
the junction box cover on top of the
motor. This product is designed to
operate on 230VAC 50Hz.
Connecting it to any other power
source may cause damage.
Installation should be carried out by a
qualified electrician, using I.E.E approved cable and fittings, and in
accordance with I.E.E. Regulations. However, in the further interests of safety
we would emphasise the electrical hazard.
WARNING: WIRES IN THE MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
GREEN/YELLOW = EARTH, BLUE = NEUTRAL, BROWN = LIVE.
• The BLUE wire must be
connected to the
terminal marked N or
coloured black.
• The BROWN wire must
be connected to the
terminal marked L or
coloured red.
• The YELLOW AND
GREEN wire must be
connected to the
terminal marked E
or
or coloured green.
We strongly recommend that this machine is connected to the mains supply
via a Residual Current Device (RCD).
If in any doubt, consult a qualified electrician. DO NOT attempt any
connections yourself.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Plug must be BS1363/A approved.
Earth
(Green and
Yellow)
Neutral
(Blue)
Ensure that the outer sheath of
the cable is firmly held by the clamp
6
Always fit
a 13 Amp
fuse.
Live
(Brown)