Directed Electronics 416 Series Benutzerhandbuch - Seite 17

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fernstart Directed Electronics 416 Series herunter. Directed Electronics 416 Series 18 Seiten. Remote start keyless entry system

Seite drucken

QUICK REFERENCE GUIDE

To lock/arm using your remote

To arm the system press

connected). The LED will begin to flash. The Failsafe® Starter Kill will

prevent the vehicle's starter from cranking if it has been installed. The vehi-

cle's horn (if connected) will honk and the parking lights will flash once to

confirm arming of the system.

To unlock/disarm using your remote

To disarm the system press

connected). The Failsafe

horn (if connected) will honk twice and the parking lights will flash twice.

Disabling the Failsafe

Turn on the ignition. Press and release the Valet

The LED will stop flashing and the vehicle should start.

To enter or exit Valet

Turn the ignition to the ON position. Turn the ignition back off. Press and

release the Valet

switch within 10 seconds. The status LED will light steadily

if you have entered Valet

The LED will turn off when exiting Valet

To activate Panic Mode

Press and hold

To exit Panic Mode

Press

on the transmitter.

Location of Valet Switch___________________________________

for one second. The doors will lock (if

for one second. The doors will unlock (if

Starter Kill will be deactivated and the vehicle's

Starter Kill without a transmitter

Mode

Mode. To exit Valet

Mode.

for 2 seconds.

switch within 10 seconds.

Mode, repeat the steps above.