Directed Electronics 7111A Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fernstart Directed Electronics 7111A herunter. Directed Electronics 7111A 14 Seiten. Keyless entry and remote start system
Seite drucken
When you are ready to drive the vehicle:
1.
Insert the ignition key and turn it to the ON (not the START)
po sition.
2.
Press the brake pedal. The remote start system shuts down and the
engine continues to run because the ignition has been turned on.
Note:
If the brake pedal is pressed before the key is in the ON position,
the engine will shut down.
While the vehicle is running during remote start operation, the system
monitors the ve hi cle and automatically shuts down the engine if it receives
any of the following shut-down inputs:
•
The brake pedal is pressed.
•
The hood is opened.
•
The shutdown toggle switch is put into the OFF position.
•
The pre-programmed run time has elapsed.
•
Remote control button is pressed and held for 3 seconds.
© 2010 Directed Electronics. All rights reserved.
5