Acorn AC-108 Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Fan Acorn AC-108 herunter. Acorn AC-108 11 Seiten.

WIRING OF CEILING FAN:

2. Connect fan wires to ceiling wires: White to Neutral, Red to Live, Green

to Ground. If you opt for lightkit, then connect the Blue to Live. If not,

cap the Blue wire off with a connector.

3. After connecting the wires, spread them apart so that the Green & White

wires are on one side and the Red wire is on the other side (fig 7).

4. Earth wire is longer than safety cord by 60mm and more. When the

failure of the suspension system occurs, the current carrying conductor

taut before the earthling conductor and the body of the fan assembly is

still effectively earthed.

5. Place the remote receiver inside the canopy (refer to the remote control

manual for remote receiver installation).

1) Total

connected from the top of the

motor:

* White – neutral wire

* Blue – live wire for lightkits

* Green – ground wire

* Red – live wire for fan

fig 7

1) After wiring done, lift up the

canopy towards the ceiling and

tighten with screw firmly (fig 8).

fig 8

four colors of wires