CTEK CGC500 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller CTEK CGC500 herunter. CTEK CGC500 20 Seiten.
Seite drucken
CTEK E-Mobility AB
To install the nanogrid.ini configuration file through the CHARGE PORTAL web
interface
5
1.
Make sure that the NANOGRID™ controller has been successfully set up to use the CHARGE PORTAL OCPP
backend.
2.
Select the NANOGRID™ controller node in the left menu.
Note: The illustration shows an example for the controller "CGC500".
2
5
3.
Select the "cog" icon.
4.
Select the "Control" tab.
5.
Push the NANOGRID™ configuration "Upload" button to select and install the nanogrid.ini file.
To install the nanogrid.ini configuration from a 3rd party CSMS (backend)
•
Speak to your CSMS support for information.
Advanced configuration
To select load balancing scheduler
The scheduler controls how the scheduling (load balancing) will be done. Three schedulers are available:
EQUAL: This scheduler tries to keep a fair distribution among EVSEs with charging EVs.
FIFO: First in first out scheduling. The EVSEs with the longest charging session are prioritized.
SIMPLEFEEDBACK: A feedback-based scheduler that can be abbreviated as SFB in nanogrid.ini. This is the
recommended scheduler.
•
Set the scheduler parameter at the top-level category to select scheduler.
Configuration instructions
3
4
7