CTEK CGC100 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor CTEK CGC100 herunter. CTEK CGC100 20 Seiten.
Auch für CTEK CGC100: Installationshandbuch (8 seiten)

Seite drucken

CTEK E-Mobility AB

To install the nanogrid.ini configuration file through the CHARGE PORTAL web

interface

Make sure that the NANOGRID™ controller has been successfully set up to use the CHARGE PORTAL OCPP

backend.

Select the NANOGRID™ controller node in the left menu.

Note: The illustration shows an example for the controller "CGC500".

Select the "cog" icon.

Select the "Control" tab.

Push the NANOGRID™ configuration "Upload" button to select and install the nanogrid.ini file.

To install the nanogrid.ini configuration from a 3rd party CSMS (backend)

•

Speak to your CSMS support for information.

Advanced configuration

To select load balancing scheduler

The scheduler controls how the scheduling (load balancing) will be done. Three schedulers are available:

EQUAL: This scheduler tries to keep a fair distribution among EVSEs with charging EVs.

FIFO: First in first out scheduling. The EVSEs with the longest charging session are prioritized.

SIMPLEFEEDBACK: A feedback-based scheduler that can be abbreviated as SFB in nanogrid.ini. This is the

recommended scheduler.

•

Set the scheduler parameter at the top-level category to select scheduler.

Configuration instructions