Clarke 6460100 Betriebs- und Wartungshandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungshandbuch für Säge Clarke 6460100 herunter. Clarke 6460100 14 Seiten. 400mm (16") scroll saw
Seite drucken
PRINCIPAL PARTS OF THE SCROLL SAW
ASSEMBLY
(Numbers in brackets refer to the item numbers in the Parts List)
Your Scroll Saw is fully assembled, except for the Blade Guard, and the Air tube. To attach these
components, proceed as follows:
Line up the holes in the blade guard (33) and that in the air tube bracket (83), with the hole in the
end of the upper arm, and insert the bolt (90). Note that the air tube bracket should lie between
the blade guard and the upper arm. Thread on the washer and nut and tighten sufficiently so
that the guard is firm but capable of pivoting. Do not over tighten.
INSTALLATION
Plan your installation. Ensure adequate space is available, with good lighting and ventilation,
and an adequate electrical supply is close at hand.
1. MOUNTING
Your Scroll Saw is provided with 3 mounting holes, and it is strongly recommended that you mount
the machine on a solid surface. A pad between the saw and the workbench is further
recommended. The best dimensions being - 24" x 12" x ½". Ensure you use flat washers between
the bolt head and the mounting hole, and do not over tighten the bolts.
7
Fig. 1