Clarke CON14110 Handbuch für Betrieb und Wartung - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Säge Clarke CON14110 herunter. Clarke CON14110 17 Seiten. 355mm 110 v abrasive cut-off saw
Seite drucken
REMOVAL AND INSTALLATION OF CUTTING DISCS
WARNING: TURN OFF AND UNPLUG THE SAW BEFORE MAKING ANY
ADJUSTMENTS OR REMOVING OR INSTALLING CUTTING WHEELS. BE SURE
THE TRIGGER SWITCH IS IN THE OFF POSITION.
Cutting discs are available from your CLARKE dealer - Part Number: 6470800
1. Lift the blade guard out of the way
as shown.
2. Loosen the screw shown
3. Rotate the hub cover as shown to
expose the blade.
4. Push and hold the blade lock.
• You may need to rotate the
blade by hand to allow the lock
to engage.
5. Remove the Hex bolt, washer,
outside flange and old cutting disc.
• Make sure that the retaining disc
surfaces are clean and flat.
6. Install the new cutting disc by
reversing the above steps.
• Do not overtighten the Hex bolt.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11