Clarke CONTRACTOR CON850 Handbuch für Betrieb und Wartung - Seite 10

Blättern Sie online oder laden Sie pdf Handbuch für Betrieb und Wartung für Säge Clarke CONTRACTOR CON850 herunter. Clarke CONTRACTOR CON850 20 Seiten. 850w

Seite drucken
Clarke CONTRACTOR CON850 Handbuch für Betrieb und Wartung

OPERATION

IMPORTANT: DO NOT plug in to the mains, unless you have ensured the saw is
switched OFF. To do this, squeeze the trigger fully, then release it.

PRIOR TO CUTTING

1. Ensure that the workpiece is securely held in place and that the cut line is
clearly marked.
2. Ensure the blade is not striking on anything below the workpiece and that
the power cable is well away from the moving blade before starting the
saw.
• Let the blade work naturally. If cutting out an aperture, it will be necessary
to drill a suitably sized hole in the workpiece for use as a starting point.
• The blade should emerge from the workpiece at every point of the cut.
3. Check that any previously used timber being sawn does not contain any
nails or other metal objects which would damage the blade.
STARTING & STOPPING
1. To start the saw, squeeze the trigger.
2. Maintain the saw at a constant speed by pressing in the lock button.
• You can then release your finger pressure on the trigger.
3. To stop the saw if the lock button is used, squeeze the trigger fully in, then
release it and the motor will stop. Always switch off before unplugging.

USING THE SAW

CAUTION: ALWAYS KEEP YOUR HANDS AND FINGERS AWAY FROM THE
SHOE LOCKING BUTTON WHEN USING YOUR SAW. DEPRESSING THE
LOCK BUTTON DURING USE MAY RESULT IN THE SHOE BECOMING
UNLOCKED AND MOVING DURING USE.
1. Place the shoe against the workpiece and squeeze the trigger to run the
saw before letting the blade touch
the cut line on the work. To make
your cut, move the saw slowly
forward along the cutting line.
2. Take care not to allow the saw to
bounce on the workpiece. Ensure
the shoe remains in contact with the
workpiece.
3. Always hold the saw with both
hands on the body and handle.
Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]
10
Fig 4