Ctl VoiceSupport Lx Betriebsanleitung - Seite 14

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Computer Hardware Ctl VoiceSupport Lx herunter. Ctl VoiceSupport Lx 16 Seiten. Linux based voice mail system, adding d/4pciuf port cards

Seite drucken

Configuring the System

4) Click the Apply changes button.

In Service - Make sure that this option is enabled so that the port is

operational.

Self Test - If this feature is enabled, the Voice Mail will perform a two-part

test at regular intervals as follows:

After taking the port off-hook, the Voice Mail will listen for dial tone. If no

dial tone exists, this would constitute a test failure.

If a dial tone exists, the Voice Mail will dial a digit on the port to see

whether the digit will break the tone. If the dial tone does not get broken,

this would constitute a test failure.

TTS Enabled - If you want to enable this port for Text-To-Speech, select

Yes.

Allow Lamp Callouts - When this field is enabled, the port will allow the

Voice Mail to light the Message Waiting lamp at the extension.

Allow Notification Callouts - When this field is enabled, the port will allow

the Voice Mail to send message notification to an extension, a local number,

or a long distance number. The port will also be used for Fax callouts.

Note - At least one port must be enabled to Allow Notification. It is

recommended that the highest numbered port be used for this purpose. If

additional ports are needed to make notification callouts, enable the next

highest numbered port.

Allow Network Callouts - When this field is enabled, the port will allow the

Voice Mail to use this port to make callouts to a mailbox in another AMIS

compatible network.

Immediate Self Test - Clicking the Apply button will cause a self test (as

described above) to be performed immediately on the selected port.

Clear Failure - Click the Apply button to clear the fail condition generated

after performing an Immediate Self Test.

VoiceSupport LX

Adding D/4PCIUF Port Cards