Clarke 3110470 Betriebs- und Wartungsanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Werkzeuge Clarke 3110470 herunter. Clarke 3110470 17 Seiten. 3/16”punch & flange tool
Seite drucken
INTRODUCTION
Thank you for purchasing this CLARKE Punch and Flange forming tool.
Before attempting to use this product, please read this manual thoroughly and
follow the instructions carefully. In doing so you will ensure the safety of yourself
and that of others around you, and you can look forward to your purchase
giving you long and satisfactory service.
Please keep these instructions in a safe place for future reference.
SPECIFICATION
Model Number
Part Number
Dimensions (L x W x H)
Max Operating Pressure
Average Air Consumption
Air Inlet Size
Min Hose Diameter
Punch Diameter
Maximum Punching Capacity
Maximum Crimping Capacity
GUARANTEE
This product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt which will be
required as proof of purchase.
This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.
Faulty goods should be returned to their place of purchase, no product can
be returned to us without prior permission. This guarantee does not affect your
statutory rights
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
CAT216
3110470
250 x 60 x 60 mm
90 psi (6.2 bar)
4 cfm (1.88l/s)
1/4"BSP female
3/8 in
3/16 in
16-gauge (1.5mm) sheet metal
14-gauge (1.8mm) sheet metal
2