Clarke 3110472 Betriebs- und Wartungsanleitung - Seite 3

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Werkzeuge Clarke 3110472 herunter. Clarke 3110472 17 Seiten. 6pc air scraper tool set

Seite drucken

GENERAL SAFETY RULES

CAUTION: FAILURE TO FOLLOW THESE PRECAUTIONS COULD RESULT IN

PERSONAL INJURY, AND/OR DAMAGE TO PROPERTY.

WORK ENVIRONMENT

1. Keep the work area clean and tidy.

2. Dress appropriately - DO NOT wear loose clothing or jewellery. Tie long hair

out of the way.

3. Keep children and visitors away - DO NOT let children handle the tool.

4. DO NOT operate the tool where there are flammable liquids or gases.

PERSONAL SAFETY

1. Stay alert and use common sense - do not operate the air tool when you

are tired or under the influence of alcohol, drugs or medication.

2. ALWAYS wear eye protection when using the tool - This must provide

protection from flying particles from the front and the side.

3. ALWAYS wear ear protection when using the air tool.

4. ALWAYS wear a dust mask when operating this type of tool.

5. DO NOT overreach - Keep proper footing and balance at all times.

6. Remove any wrench before turning the power tool on. A wrench left

attached to a moving part of the power tool may result in personal injury.

USE OF AIR POWERED TOOLS

1. NEVER use oxygen, CO

source of power for the tool.

2. DO NOT connect the air supply hose with your finger on the trigger.

3. DO NOT exceed the maximum pressure for the tool of 90 psi / 6.2 bar.

4. Check hoses for leaks or worn condition before use, and ensure that all

connections are secure.

5. DO NOT use the tool for any other purpose than that described in this

manual.

6. ALWAYS keep the air supply hose away from heat, oil and sharp edges.

7. DO NOT fit the tool to any stand or clamping device that may damage it.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

, combustible gases or any type of bottled gas as a