Clarke 3120137 Betriebs- und Wartungsanleitung - Seite 12

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Werkzeuge Clarke 3120137 herunter. Clarke 3120137 17 Seiten.

TROUBLESHOOTING

SYMPTOM

Grease gun fails to work

or is slow.

Gun will not shut off.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

PROBLEM

Air pockets in the gun

Air hose leaks.

Low air pressure.

Plunger is sticking.

Cartridge is empty

Grease gun is too cold. The gun needs to be at

O-rings damaged or ill-

fitting in seat.

SOLUTION

Draw back the plunger

handle fully and release by

pressing the handle

release. Repeat several

times. This will help to move

the rubber ring into the car-

tridge tube, which essential

for the grease gun to work.

Push the plunger handle all

the way in.

Press the air vent valve

several times to free the air.

Tighten and seal hose

fittings with teflon tape.

Adjust compressor

regulator to 90 psi.

Lubricate plunger.

Refill the container tube.

room temperature(65-80

Return to Clarke dealer for

repair.