Clarke 3120187 Betriebs- und Wartungsanleitung - Seite 4

Blättern Sie online oder laden Sie pdf Betriebs- und Wartungsanleitung für Werkzeuge Clarke 3120187 herunter. Clarke 3120187 13 Seiten.

• Moving to another work area.

• Passing the tool to another person.

10. Never use the tool if it is defective or operating abnormally.

11. This tool should be serviced at regular intervals by qualified personnel.

12. Avoid damaging the tool by applying excessive force.

13. Always maintain the tool with care. Keep it clean for the best and safest

performance.

14. Quick change couplings should not be located at the tool. They add

weight and could fail due to vibration.

15. Do not force or misuse the tool. It will do a better and safer job at the rate

for which it was designed.

16. Do not remove any labels. Damaged labels should be replaced.

17. This tool vibrates with use. Vibration may be harmful to your hands or arms.

Stop using the tool if discomfort, a tingling feeling or pain occurs. Seek

medical advice before resuming use.

18. Always use both hands to control the tool.

19. Always ensure the tool has stopped before putting it down after use

TRANSPORT & STORAGE

1. Never carry the tool by the air hose or with your finger on the trigger.

2. Always disconnect from the air supply when the tool is not required for

immediate use in order to avoid accidental starting.

3. When not in use the tool should be disconnected from the air supply and

stored in a dry place out of the reach of children.

4. Avoid storing the tool where the temperature is below 0

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]