Clarke CAR15PC Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Werkzeuge Clarke CAR15PC herunter. Clarke CAR15PC 8 Seiten. Retractable air hose reel

INSTALLATION

The hose reel may be mounted to a wall, floor or ceiling as required. Ensure the mounting

hardware and the mounting position is of sufficient strength to support the hose and reel, plus the

force required to extend the hose.

Choose a suitable mounting position close enough to the compressor that the two items can be

connected together using a shorter length of hose and from where, the air compressor can be

conveniently adjusted. Mount the CAR9PC reel using two M8 bolts with washers secured through

slots in the mounting bracket. Expanding bolts are supplied with the CAR15PC model for

attaching to the building structure.

When the reel is secured in position, attach the air hose coming from the compressor. Wrap the

threads of the male connector with teflon tape or other thread sealant, and connect to the air inlet

hose of the hose reel. Use teflon tape at hose outlet when attaching air powered tools.

Check the reel for correct operation, as follows:

Gently pull out the hose - a series of clicks will be heard, every half revolution of the drum.

When a click is heard, release the hose. It should be held by the latch. Continue to pull out the

hose, and after a series of clicks, at various lengths, release it to check the operation of the latch.

To release the latch, give the hose a brief pull, and allow the hose to retract, under control, until

the stopper rests on the hose guide. Do not suddenly let go of the hose. If the hose becomes

twisted, pull out a long length of hose before retracting so as to smooth out the hose.

When not in use, avoid leaving the reel exposed to very low temperatures which will make the

hose less flexible and difficult to retract.

Avoid contact with chemicals and solvents such as acetone, white spirit etc.