Clarke CHT403 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Werkzeuge Clarke CHT403 herunter. Clarke CHT403 8 Seiten. Carpet knee kicker

Replace the pads, ensuring the blade

points face away from the padded end

and is fully and properly seated in the

recess.

Refit the screws and tighten using a cross-

head screwdriver.

REMOVING THE TEETH BLOCK

To remove the Teeth Block, firstly remove the

gripper pads as described previously, then,

using a protective glove or similar to hold the

teeth block, rotate the teeth setting adjuster

knob anticlockwise until it becomes fully

disengaged from the adjuster assembly, then

lift it free.

Replace in reverse order, screwing the adjuster

knob clockwise fully, until the '0' on the knob

dial aligns with the marker on the body.

Finally, refit the gripper pads as described

above.

SPARE PARTS

The following parts are available:

• Teeth Assembly

• Gripper Blade Pad Assembly

• Gripper Blade fixing screws (x2)

Parts & Service: 020 8988 7400/E-mail:[email protected] or [email protected]

Part No: CHT40101

Part No: CHT40102

Part No: CHT40103