DirecTV Genie C41W Handbuch für Installation und Fehlersuche - Seite 11
Blättern Sie online oder laden Sie pdf Handbuch für Installation und Fehlersuche für Empfänger DirecTV Genie C41W herunter. DirecTV Genie C41W 16 Seiten. Directv wireless video bridge and wireless genie mini
Seite drucken
WVB LED States
LED State
Off
Blink Blue
Solid Blue
Solid Yellow
Blink Yellow
Solid Red
Blink Red
Blink Green and Yellow
Blinking Green
Solid Green
Blink Green and Blue
Wireless Genie Mini and WVB
Description
Device not powered
Booting up.
Start within 10 seconds of power ON.
Normal Operation
Wireless Clients should have a connection to the
Genie Server.
MoCA Network Established but MoCA network is
degraded
No MoCA Network Detected.
The WVB has a good connection to the Genie server;
however there is a Poor Wireless connection to one or
more Wireless Clients (C41W).
Device Error Detected
Wireless Video Bridge in Beacon Mode.
Transitioning out of Wireless Video Bridge Beacon
Mode
MoCA network connected, however there is no
communication between the Genie server and the
WVB
Good Connection to the Genie server but no Wireless
Clients paired with WVB.
Wireless Client Add mode
Troubleshooting and Diagnostics
Action
Plug in the approved power supply to a reliable power source.
Normal WVB boot up process, takes approximately 2 minutes.
No Action.
Troubleshoot the MoCA / Coax network. Verify cabling and connectors.
Troubleshoot the MoCA / Coax network. Verify cabling and connectors.
Follow "Wireless Client (C41W) Network LED Failures" troubleshooting, focusing on
the Wireless Client(s) that has a Yellow or Red Network LED
1.
Perform a reset on the WVB.
2.
If WVB continues to blink red, replace the WVB.
Normal Wireless Video Bridge survey/Beacon mode without MoCA network
connected.
Used to position the WVB and Wireless Clients during the Wireless Video Bridge
survey/Beacon Mode.
This is normal when initially connecting to the MoCA network. Allow 5 minutes for the
LED to change to Solid Green.
Follow "Adding Wireless Clients" steps to pair and register the Wireless Clients.
Normal state when adding Wireless Clients (C41W). See Adding Wireless Client for
next steps
11
WVB LED States